Missing Data In VRM API... PVI Solar Readings

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

nasha asked Feb 10, '22

Hi,

I'm not seeing any readings for a Solar Charger's PVCurrent (PVI) data.

Both the Cerbo & VRM Portal are showing the correct values, its just the VRM API isn't returning any values.

Is this just me?

Cheers,

--Andy

MPPT Controllers VRM api

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-02-10T18:37:25Z

mvader (Victron Energy) answered · Feb 10, 2022 at 06:37 PM

Hi @nasha , PVI is no longer submitted by the Cerbo GX; to get it, divide watts by voltage. The graphs you see on VRM do the same.

This changed in v2.80.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2022-02-10T18:41:55Z

nasha answered · Feb 10, 2022 at 06:41 PM

Thanks for the response, I realised earlier that may be the way I could get the same result.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.