question

David avatar image
David asked

After blackout I cannot connect to cerbo UI on local lan IP

I had a (grid) blackout this morning, and as a result, my internet router had issues. After rebuilding my local network I have issues connecting to the local LAN IP of my Cerbo.

I can access the Cerbo via VRM- including the Remote Console. However, if I try to access the Cerbo UI via its Local LAN IP - 192.168.100.107 (assigned by DHCP) - I get refused to connect error.

Tried the local link IP as well - no go.

I know it's connected to the internet and working, as it's accessible via VRM.. But I'm puzzled as to why I can't get to it locally?

I can ping it - No probs.

Any ideas as to why the WebUI may not be working? (im running the 2.80~5 I think)

cerbo gxTCP IP Networking
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
JohnC avatar image
JohnC answered ·

Hi @David

Try a reboot of the Cerbo. Or a firmware update to 2.81

Instead of the IP numbers, try typing "venus.local".

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Cerbo GX product page

GX family product range

Cerbo GX & GX Touch datasheet

Cerbo GX Manual

Venus root access document