question

rob-glazier avatar image
rob-glazier asked

Wiring Options for Blue Smart Charger 12|

Hi All.

I recently purchased the Blue Smart Charger 12 | 7 and I'm wondering if it is suitable for my use (I suppose i should have asked this before buying it). I have a 26' sail boat with a single 12V AGM battery, and currently only a DC system. All loads are very light, under 2amp draw.

I'm wondering if this charger is suitable to be installed for charging on an ongoing basis when hooked up to shore power? and also the charger comes with a 3 prong AC plug for input, can this plug be stripped and wired into an AC panel as i've planned in my wiring diagram?

Appreciate anyone's input. Thank yougael-wiring-jan11.jpg

battery chargingchargerwiringwiring diagram
gael-wiring-jan11.jpg (79.6 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kevgermany avatar image
kevgermany answered ·

Should work, but you may need galvanic isolation. Best check.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rob-glazier avatar image rob-glazier commented ·

Thanks for the response. The boat is in fresh water and has an outboard, so i'm on the fence on the isolator

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

Victron Wiring Unlimited PDF

Victron Wiring Unlimited Online

VictronConnect VE.Bus charging manual