Hi All,
Yesterday the P/V read-out was switching between 28w and 31w .I disconnected the P/V array and the batteries, turned it off on the "toggle"switch.
Powered it up today and it seems stuck on the V/E blue-screen.
Any suggestions ?
Cheers Ian.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi All,
Yesterday the P/V read-out was switching between 28w and 31w .I disconnected the P/V array and the batteries, turned it off on the "toggle"switch.
Powered it up today and it seems stuck on the V/E blue-screen.
Any suggestions ?
Cheers Ian.
29 People are following this question.