question

rdcat avatar image
rdcat asked

CerboGX - IO Menu - No Tanks Found (was working)

CerboGX suddenly shows "No Tanks Found" for 2 x water tanks
Was working yesterday
IO / Analog is an empty screen. The 4 analog inputs are not listed.
HELP!

cerbo gxtank monitoranalog
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
devodave avatar image
devodave answered ·

Tried turning it off and on?

Perform a reboot?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rdcat avatar image
rdcat answered ·

Reboot
Power Cycle
Firmware Rollback (2.73 to 2.72)
Unplug all cables and inputs - USB VE.Direct etc
Run without HDMI
Full factory reset (File to USB etc)
RC Firmware (Latest RC) - Now I get BT on IO page, but no Analog listed.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dani-the-kid avatar image
dani-the-kid answered ·

I am having the exact same issue on a customer’s cerbo. Had four tanks connected and working. Showing on gx touch and remotely.

Only change, had installers in florida add two smart shunts to the system and updated firmware on cerbo.

now, no tanks or corresponding menu. Analog page also blank.

have you found a fix?

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rdcat avatar image rdcat commented ·
No :)

I live in hope
And bought 2 x Blueseas gauges (the 4 way is out of stock) :(
Debating how to do warranty when international

0 Likes 0 ·