I am after some advice/help setting up a Victron Orion TR Smart as a charger for an Auxiliary battery.
-I am using an Orion TR-Smart 12 | 12 - 30A NON-Isolated DC-DC unit.
-It is installed in an older diesel vehicle with a regular alternator, output of alternator is 60A.
-I have a lead acid starting battery that is connected to the Victron Orion Input, and the Output goes to an EnerSys Powersafe SBS-100F 100AH AGM Battery. (Auxiliary/Second Battery)
-There is also a Victron MPPT Solar Regulator connected to the Auxiliary battery.
-My goal is to have the auxiliary battery receiving charge from the DC-DC Unit, which is run off the main battery.
-I will be running a subwoofer, 60LTR fridge/freezer and volt meter off the Auxiliary Battery.
I am not sure what settings I should be using as a base setup (through the VictronConnect app).
Would anyone be able to give me suitable settings for this kind of use?
d
Kind Regards.