Cerbo GX - monitor hatch with reed switch

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

bigal asked Dec 28, '21

I would like to monitor a hatch as a burglar alarm type scenario with a reed switch.

I have a Cerbo GX. Is it as simple as wiring (C) common and NO to the digital inputs?

cerbo gx

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-12-28T18:36:04Z

wkirby answered · Dec 28, 2021 at 06:36 PM

Yes, that is correct.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2021-12-28T18:38:33Z

Alexandra answered · Dec 28, 2021 at 06:38 PM

Yes it is that simple

Then you need to program the Cerbo.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.