question

bskz avatar image
bskz asked

VE.Bus BMS and BlueSolar MTTP solar charger

Will VE.Bus BMS disconnect solar charger if it is connected through Venus controller in stead of direct connection between VE.Bus BMS and solar charger? It is 3 parallel Victron MultiPlus 48V, Victron VE.Bus BMS, 2 Victron smart LFP batteries in series, 2 Victron MTTP BlueSolar chargers all connected to Victron Venus controller in heart.

BMSVenus GX - VGX
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Sarah avatar image
Sarah answered ·

The BMS should be able to control both the Multiplus and MPPT controllers charge algorithms and the ATC / ATD settings. This may operate a bit differently (current limiting setting) if you are using a beta version of the Venus software.

f05ed25d-4942-4066-b515-92b06417dbee.jpegImage Caption


ae1ba025-1596-4a63-96f6-e8eb993663a0.jpeg


f05ed25d-4942-4066-b515-92b06417dbee.jpeg (319.5 KiB)
ae1ba025-1596-4a63-96f6-e8eb993663a0.jpeg (549.6 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bskz avatar image
bskz answered ·

Am O doing something wrong? Or I misunderstood the point? Thanks!

screenshot-20211230-1211062.png






screenshot-20211230-121517.png



screenshot-20211230-121503.png


screenshot-20211230-1211062.png (235.3 KiB)
screenshot-20211230-121517.png (232.2 KiB)
screenshot-20211230-121503.png (241.7 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.