question

Was avatar image
Was asked

Multiplus II not showing in VictronConnect

I have EasySolar II GX,
Am looking to configure some settings on the Multiplus II via VictronConnect,
however when i open the app, i can only see the SmartSolar and EasySolar-II,
any ideas why the Multiplus is not showing ?

EasySolar All-in-One
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

To change settings of a VE.Bus device you need a MK3 Interface or a GX device connected to the VRM portal.

https://www.victronenergy.com/media/pg/VE.Bus_Configuration_Guide/en/index-en.html

https://www.victronenergy.com/live/vrm_portal:remote-veconfigure

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.