Set up a generator set - Victron Multiplus II

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

Rafa Gómez asked Dec 27, '21

I have a solar installation at home with the following components.

I have a victron Energy MultiPlus 2 inverter 48 volts 5000 volts amps and 70 amps, I have two smartsolar chargers and a Venus GX.

The batteries are charged with 14 plates of 450 watts. 8 pylontech batteries of 2.4.

Currently I am low on charge in the batteries so I bought a Redstone genset with 3000 nominal power 3300 maximum power.

The genset is simple, it does NOT have automatic start (I have to start it manually)

General

Grid

Inverter

Charger

Virtual

How should i have the settings done?

Thanks a lot.

victron

01-general.jpg (71.4 KiB)

02-grid.jpg (64.8 KiB)

03-inverter.jpg (77.7 KiB)

04-charger.jpg (71.7 KiB)

05-virtual.jpg (67.2 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-12-27T20:15:09Z

anrich answered · Dec 27, 2021 at 08:15 PM

Hi Rafa,

Have you read the generator FAQ? If you have followed the suggestions in the FAQ, which problem are you experiencing?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.