question

Mark Maritz avatar image
Mark Maritz asked

Add N/XXXXXXX/solarcharger/280/Pv/I (Amps) to MQTT

Can you add Amps for the Solar Charge PV section of MQTT?

eg: N/XXXXXX/solarcharger/280/Pv/I

It displays in Victron Connect and VRM but no value is available in MQTT.

Thanks

Mark

MQTT
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @Mark Maritz,

AFAIK this path has been removed because it can be calculated from Power and Voltage.
It's somewhere in the change logs of Venus OS. So depending on what firmware version you have installed on your GX device you might not get this value anymore.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron MQTT readme