question

alexv avatar image
alexv asked

VRM Digital input alarm email not indicating which input

When an alarm is generated due to a digital input state change, an email is sent, but the mail is missing any indication of which digital input changed state. It does not indicate the input line number nor does it give the name I have defined for the input in the Device menu of the Cerbo GX. Example of mail:


Digital input state: running

Wait time: 60 seconds

Site time: 2021-12-20 07:44:16 Europe/Berlin

UTC time: 2021-12-20 06:44:16 UTC


Is there any way I can change this? Running v2.73 on Cerbo GX.

cerbo gxVRM
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
shicks3 avatar image
shicks3 answered ·

I'm having the same issue: I'm running 2.84 CerboGX. I've set the device names and VRM shows them correctly. But emails give no indication which device it is reporting. No name or device number, only the parameter. In my case I have several Ruuvi devices, all report "temperature" but I don't know which device. Would be awesome if this were fixed.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.