question

yboston avatar image
yboston asked

How to connect multiplus to cerbo gx

I used the ve.bus/RJ45 to connect the multiplus to cerbo gx. But cerbo gx doesn’t detect the device. Did I miss anything? Thanks in advance.

cerbo gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Paul B avatar image
Paul B answered ·

it should just pick it up and show the multiplus - Please make sure that both units are on the latest firmware.

also have you got a orginal VICTRON VE.Bus cable.

Knowing what model mutilplus and FW thats on your the units would also be of help


Eddited

Make sure the Cable is plugged into the VE.Bus Port on the Cerbo

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

yboston avatar image
yboston answered ·

Thanks, Paul. This issue is solved. I was plugging in the network port instead of ve bus port, both are rj45.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.