Multiplus II dead after 2611491 firmware

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

mark-ruijzenaars asked Dec 17, '21

I just have tried to update my Multiplus II 24/3000/70 with VRM / cerbo from 489 to 491.

It hangs at 40% (for 30min). Now it is in a bad state :(.

On the Multiplus all the LED are fast flashing at the same time.

Can somebody help me what to do?

(Try with VEFLASH? or a hare reset?)

Regards!

Multiplus-II firmware update

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE answered · Dec 17, 2021 at 07:47 PM

I would try to use VEflash, this should work.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-12-18T14:47:39Z

mark-ruijzenaars answered · Dec 18, 2021 at 02:47 PM

With veflash is the installation working again! Somebody know what was ging wrong? Did i do something wrong?

Thanks!

Regards

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.