question

poco avatar image
poco asked

Can I use the Victron Smart BatteryProtect 12/24V-100A and Cyrix CT combiner for low voltage protection and charging?

Hey all, I want to protect 4 CALB 3.2v 180ah lithium batteries in series, as well as charge them from my vehicle charging system. which is a Ford van with a 115 amp alternator.

It looks like the smart battery protect 12/24-100A might be good for the LVD, what about over-voltage protection?

Are any of the Cyrix-CT or Cyrix-LI suitable for charging from the vehicle charging system?

Pretty soon, I'll be adding a solar panel and controller, just not there yet.

Any thoughts are appreciated.

Thank you.

battery chargingLithium Battery
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

you could also use a BP but the In is connected to the charge devices and the out to the battery.

This can then control the charging etc and protect them from HV

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Battery Compatibility

Did You Know - How to create a battery profile for non-Victron batteries?

Additional resources still need to be added for this topic