question

dc-generators avatar image
dc-generators asked

SmartShunt and BMS Vregs required by Victron

In need of vregs for the Smartshunt.

Currently developing a controller to read via VE. CAN battery bank voltage, current and state of charge of Smartshunt.

Tried searching everywhere for the associated vreg to no avail.

Can Victron please shed some light on the request?

VE.Can
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

4 Answers
kevgermany avatar image
kevgermany answered ·

I answered your other post.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dc-generators avatar image
dc-generators answered ·

@kevgermany thanks for the reply. Although I am trying to get vregs for Bulk, Absorbtion, Tail current and the ability to add a new product ID. These are not available in the vreg list.

I did try to use Modbus TCP and was successful in reading system voltage, current, SoC, time to go.



2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image
kevgermany answered ·

Sorry, can't help with them.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi, can you explain a bit more what you’re looking for and what for?

Why do you need to add a new product id?


note that I moved this question to the Mods section.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic