This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
I use the Cerbo to switch on/off my generator and installed the automatic switch when battery SOC is below 70%. This works!
When the Cerbo switches the generator on based on the SOC I can’t switch it off manually. I had to disconnect the relay to get it off.
Do I miss a function or screen in the Cerbo, I like to be in control ….
Tnx
under setting and generator autostart there is a toggle that turns Autostart on/off
or install this add on by Kevin Windrem and you can then use the cerbo tough screen
https://github.com/kwindrem/SetupHelper/blob/main/venus-data.tgz
Read the read me at the bottom of this link
https://github.com/kwindrem/SetupHelper
