question

Jim gray avatar image
Jim gray asked

I have a bmv712 connected to a colour control

I have a bmv712 connected to a colour control

I am getting a low start voltage notifications on the colour control at random intervals even though the start voltage is 25.6.

The Low voltage alarm levels are wound down to 18 volts its the clear at 22v

The alarm is not appearing on the bmv

But the notifications are appearing at random

Intervals on the colour control , has any one had similar or provide help thx in advance




CCGX Color Control
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Mark avatar image
Mark answered ·

Just wondering - is it maybe actually dropping to this level momentarily during a real engine start?

Maybe you can test this? Unless you have not conducted any real start's...

Otherwise, if not already done ensure that both are running the latest firmware. I had some funky stuff happen once when I connected a new CCGX (before firmware upgrade) to a BMV that was running the latest level firmware.


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.