question

jajaja avatar image
jajaja asked

Phoenix Inverter Compact 24/2000 — connect a remote switch

Hello.

I use a Victron Inverter Phoenix Compact 24/2000

In the manual was shown a different board with other connectors then i have inside my inverter. The manual told me to connect a remote switch on terminal "H". On this position i haven't a terminal, that place is free. What i have, that are two 3 Pin connectors. The left one was named as "remote switch" with "CH" - "COM" - "IN". How i have to connect there my switch or otherwise the relais output from my bms712?

I hope someone can help me.


Thanks a lot and best regards from me - Markus

Phoenix Inverterremote console
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

javin avatar image javin commented ·

Hoe sluit ik de remote schakelaar aan op de victron compact 1200 ik heb de ingangen CH-COM-IN ?

0 Likes 0 ·
2 Answers
jajaja avatar image
jajaja answered ·

Hi Daniël,

many thanks for your answer.

If i understand it correctly, i have connected: + / - / +

So i switch + <> -

Is that right?

Thanks again.

sketch-1638514837593.png


sketch-1638514837593.png (944.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

screenshot-2021-12-03-031948.png (72.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Phoenix Inverter product page

Phoenix Inverter Smart product page

Additional resources still need to be added for this topic