question

marc-kelly avatar image
marc-kelly asked

CerboGX and VE.Bus BMS with single multiplus VE.Bus port

Hi there.

I've a system with a 12/800/35 multiplus and Cerbo GX. I want to install the VE.Bus BMS and lithium. In this system, wired as below, how do I connect two devices (AC detector and Cerbo GX) to the single VE.Bus port on the multiplus? Can I use an RJ45 splitter?

1637094677340.png

TLDR, in the diagram above, where/how to connect a Cerbo GX?

multiplus ve.bus
1637094677340.png (242.5 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic