question

pmikep avatar image
pmikep asked

Q for Victron regarding the "granularity" of Multiplus Adaptive Absorbtion Charge Curve

This is Question 1 of 2 for a Victron Engineer.

I am probably trying to use the Adaptive (Absorption) Charge Curve in a Multiplus for a use case that Victron never anticipated or intended. (As described in Question 2.)

For this Question, I am simply asking how granular the Adaptive Charge Curve is?

For example, if Bulk charge re-starts after Float, and lasts for 30 minutes, I expect Adaptive Absorption to last for, say, only 15 minutes.

But it doesn't. Absorption runs a full hour again, the fixed time limit that I have set.

So it could be that Adaptive Charge thinks only in one hour increments, not smaller increments, like 15 minute increments.

And so the question: Please, what are the time increments for the Adaptive Charge Curve for the Multiplus?

MultiPlus Quattro Inverter Charger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers