Hello,
after updating the firmware of my multis some problems appeared.
AFAIR I used to be on FW 486 before updating. I assume that the changes being mentioned below have been introduced in v489.
Since the update it is no longer possible to force the multi to passthru by turning the charger off (dbus --> DisableCharge=1) while ESS mode is NOT set to External Control. This results in many problems for my specific use case. In the changelog there hasn't been a word about this change of behaviour, so I'm not sure whether this is intended or not.
As a solution I wanted to revert to the previous FW version in order to get my system working again. However
a) there are only some "main" versions in the download area
b) there is only the most recent version (v490) for my Multi (2668). For my second multi (2616) there was v459 which is actually quite old.
For (a):
I think you don't want to confuse users with an overwhelming mass of FW versions. IMHO there should be at least some kind of archive where ALL FW versions could be found and downloaded, though.
For (b):
I don't know why. I wasn't able to find any FW but the latest one. This is really very annoying.
Anyway - I'd really appreciate if anyone (including the VE staff) could kindly provide 2668488.vff and 2616488.vff files. In case the above mentioned changes have been introduced in v487, I'm going to need this version, too (both 2668487.vff and 2616487.vff)
Thanks in advance for your help.
So long,
Frank