question

mianfrar avatar image
mianfrar asked

VE. Configure "External current sensor connected"

When entering the VE. Configure the multiplus II on the first sheet there is a field called "External current sensor connected" which does not say anything in the help and I do not know when it is activated and when not, nor do I know if it refers to an external meter type EM-112 or the transformer connected to the "current sensor" port of the multiplus, any information about this field?

VEConfigure 3
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

This option is only for the optional current transformer.

https://www.victronenergy.com/accessories/current-transformer-for-multiplus-ii

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mianfrar avatar image mianfrar commented ·


thank you very much, I could not find that information

0 Likes 0 ·