question

tim-hickman avatar image
tim-hickman asked

Has it become possible to have a different number of Multiplus per phase?

I have an application that would ideally have extra capacity on one phase as there is occasional temporary extra load on L1.

In June 2019 this was answered as not possible (https://community.victronenergy.com/questions/22233/3-phase-different-number-of-inverters-per-phase.html). @Daniël Boekel (Victron Energy Staff)

Has there been any development on this?

Thanks

3 phasemultiplus in parallel
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tim-hickman avatar image tim-hickman commented ·

This thread gives me hope that it may be possible:

https://community.victronenergy.com/questions/12953/are-multiphase-systems-required-to-be-symmetric.html

@Johannes Boonstra (Victron Energy Staff)

0 Likes 0 ·
1 Answer
Johannes Boonstra (Victron Energy Staff) avatar image
Johannes Boonstra (Victron Energy Staff) answered ·

Yes , that’s already possible from the beginning of being able to parallel

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

shaneyake avatar image shaneyake commented ·
It has been possible but can ESS be used on these systems? Answer in the past has been No.
0 Likes 0 ·
tim-hickman avatar image tim-hickman commented ·

The question is about non-symetrical parallel configurations for ESS. For example:

L1 (R) - 2 x Multiplus II 5kVA

L2 (Y) - 1 x Multiplus II 5kVA

L3 (B) - 1 x Multiplus II 5kVA

Is this possible?


0 Likes 0 ·