Name of DC side terminals on Phoenix 12/375 inverter ?

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

bestelissie asked Oct 20, '21

Hi.

So I made the mistake of not tightening the DC side terminal screws enough, which has resulted in a melted minus terminal.

Luckily the DC terminals are easy to remove; Now I just have the problem of trying to figure out the name of the terminal so i can order a new one.

Does anybody know the name of the terminals on the DC side of a Phoenix 12/375 inverter ?

Thank you.

Phoenix Inverter terminals

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2023-04-28T04:29:50Z

Andrew answered · Apr 28, 2023 at 04:29 AM

Hi Bestelissie,

I also have a customer who accidently damaged the terminal.

I believe these are a Euro terminal block with clip version.

See here Clip version - http://www.euroclamp.it/MPT1010

See here Nut version - http://www.euroclamp.it/MPT1010-D

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.