question

mudd avatar image
mudd asked

Easy solar 2 GX which i have just connected to a 10kw generator,

I have a Easy solar 2 GX which i have just connected to a 10kw generator, how do I know its charging the batteries ?

EasySolar All-in-One
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
marekp avatar image
marekp answered ·

1. measure the current going into the battery,

2. measure the battery voltage and if it is going up than battery is charged,

3. watch the screen on the ES-II gx and you will see the battery SOC and current,

4. connect your ES-II gx to the network and run Remote Console. Information about battery state is there,

5. VRM portal is also a good way to see what is happening in your system.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.