Dear victron-community,
I would like to turn my Phoenix Inverter Compact On and Off with my 123SmartBMS to protect miy LiFePO-batteries. Unfortunately the inverter doesn´t have auxiliary inputs as the new multi- or quatro-models have. So my question is the following:
Can I use the remote connector on the Phoenix Inverter Compact for remote switch to controll it with the load-relay of my 123Smart BMS?
Has anybody experience with it? In the FAQ of the 123SmartBMS there is a section on "How to control a victron device.". Unfortunately the use case for a Phoenix Inverter Compact is not well elaborated. A video on youtube shows that it is possible with a Phoenix Inverter but doesn´t explain how the connection is made.
Here are my sysem specifications:
Inverter:
- Phoenix Inverter Compact 24Volt/2000VA, 230V
Battery Management System:
- 123SmartBMS gen3
Battery:
- 8x LLiFeYPO4-3.3V/90Ah
- row connection to 24V-System