bug: AC output information still shown with inverter off

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

Kevin Windrem asked Oct 1, '21

SOMETIMES, the AC Load tile shows power with the inverter turned off. Other times, the tile goes blank as I'd expect.

I verified that the system dbus and VE.Bus dbus parameters remain valid when this happens and shows - when the tile is blank.

I tested this on v2.73 and v2.80~21 with same results.

Venus OS VE.Bus bug report

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-10-01T17:34:07Z

mvader (Victron Energy) answered · Oct 01, 2021 at 05:34 PM

Hi Kevin, thank you; we’ll look into that

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) ♦♦ commented · Oct 01, 2021 at 05:36 PM

Ps. Can you check what happens on VRM, and then specifically in the xlsx download; in the ac load column in the System section?

Or, let me know an exact date/time so we can look.

0 ·