I've tried to do some digging and haven't found very much in the way of a clear answer or anyone that has done this.
I've recently been upgrading my boats electrical system to all Victron components. I now have a Cerbo GX, 100/50 Solar MPPT charger, and the smart shunt 1000. The rest of my boats electronics are all Raymarine and I have had zero issues interfacing the new components into the existing HS network.
Only missing piece of the puzzle is that I have a Xantrax Marine 3KW inverter charger. It does a great job and I have no reason to spend the extra money to replace it. The Xantrx Marine device does interface with my NMEA 2k network. I can see that device fine from my Raymarine suite. So it is fully NMEA 2k compliant.
Is there a way for me to get the Cerbo GX to detect that there is NMEA 2k inverter charge and display the data it is sending? I understand it is very unlikely to be able to control it, but I want to be able to monitor everything from one location and right now it will not detect any inverter charger.
Thanks for any help you all can give.
Aloha
Nathan