- Currently we use Cerbo GX to read data from the smart shunts (500A) and Bluesolar regulators (MPPT 75/15). The regulators data instance ID goes to default whenever I lose the power to the Cerbo GX. But this doesn't happen to the smart shunts, they come live and start to send data when it again powered. I got three smart shunts and 7 regulators. All my smart shunts are connected to Cerbo directly using VE direct cables and the regulators were connected through powered USB hub.
- ( Here, am using NMEA reader to set the data instance). Whenever I lose the power, I have to reconnect the actisense and set the data instance again.
- I'm using Empirbus system to monitor all these data and the end result is no info from regulators due to this. The PGN number is 127 508.
- From my understanding, the pgn is forgetting the data instance ID whenever a power outage happens in Cerbo. But this only happens with mppts.
Is there any fix for this?