question

dirkmuc avatar image
dirkmuc asked

BMV712 in DC Load Monitor and VRM display

Hello everybody,

I cofigured my BMV712 into a DC loadmeter to see my load. additionally I monitor my starter alternator with it. On the Victron connect app and in Venus OS I can see all the values, but in VRM nothing, just -0,01V which is not coming from the BMV712. See pictures attached.

Do I do something wrong or is it a VRM issue? I use 2.80~16 large 21 on a RPi4.

Kind regards

Dirk

gleichstromlast-venus-os.jpg

gleichstromlast-vrm.jpg


VRMVenus OS
gleichstromlast-venus-os.jpg (29.8 KiB)
gleichstromlast-vrm.jpg (11.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
bathnm avatar image
bathnm answered ·

I have the same. This is early functionality and I suspect the work to link the data from VenusOS in VRM for DC load is not yet in place.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

harold avatar image
harold answered ·

You are on a beta version anyway!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Victron Venus OS Open Source intro page

Venus OS GitHub (please do not post to this)