set up .....victron phoenix 12v 1200 inverter
3 feet 25mm2 cables positive inline circuite breaker 150a to battery all DC
2 x 110 ah batterys led acid pararell
battery level full
PROBLEM IS when i connect a 12v 1000w kettle to boil for a tea it trips the circute braker after about 5 sec
if i take the circuite breaker out of the cable it all works boiling the water
the iverter i no has a 200a fuse inside i was told.. am just trying to add a bit more safe by adding the breaker outside ...so why is it tripping
i have tried it it with a microwave 800w with the inline breaker and that works
any help please