Hi,
Firstly thanks for all the information and support on here. It has really helped me deploy my system. It is all working except for a few little niggles.
The system is based in my campervan and whilst I have mains hookup I pretty much only ever run solar power or DC-DC charging. On the dashboard, it shows AC Inputs - I have tried to set this in the settings to 'not available' but it doesn't save after I click the tick and leave the menu.
My system is as follows:
RPI connected via VE Direct cable to Victron Smart Shunt and Victron Inverter.
Thank you.
On a side note - it does show AC loads but despite things being pugged into my inverter they don't appear on AC loads.
