This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I recently replaced my batteries from 440amp/h to 1380amp/h.
the SOC used to be correct but now when MPPT reaches float SOC is still showing 87%.
I configured my MultiPlus to the correct size.
Is there any way to reset battery SOC to 100% when MPPT reaches float?
Sometimes you need a cycle or two or it to resync especially if it is the ve bus soc
Unless you have a bmv there is no way to force the multi to acknowledge 100%
