hi,
in the dashboard you have power that is going to the grid and power that is taken from the grid.
in my system a 3 phase system. ( 3 x multiplus 2 , smarthsunt, mppt, ccgx an ac coupled pv system.) is there a little problem withe the calculation af the power.
when i sending power to the grid on phase 1 lets say 1 kw and i using 1 kw on phase 2 the energy meter from the grid stays on 0. what is normal in this case.
but in the victron dashboard its counting the 1 kw that i am sending on phase 1 on the to grid counter.
and the 1 kw that i am taking from te grid it is counting on the from grid counter.
is it posible to disable this an to use the same calculation that the grid meter is using ?
phase compensation is enabled in the ess system now.
thanks
dieter
