This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Like 4kw of PV, 1 fronius ig30, 1 SMA SunnyBOY 3000, 1 immersun (maximum deviation 3000w), 1 multiplus II and approximately 20kw of lipo4. How would you configure a Powerwall storage system with average daily consumption above 20kwh per day
Note: In the event of a network failure, you want to be able to inject more than the multiplus 2400w.
thank you
As I mentioned in your other similar post, please contact your local distributor for this matter.
You have already made similar posts here, here and here.
Sorry to say we are not as well equiped to solve all the implications of a complex system design on this community, and many things are still best discussed with a local installer.
