Two questions for setting up the BMV-702 relay:
1. 'Setting 12' Invert relay: ON sets the relay to indicate it is open. In my view I would think On would mean the relay is ON that is closed.
So does ON mean the contacts are open?
2. How to test the relay: I am using the BMV-702 to operate a 60 amp 12V relay (NCC) which will trip all output from my Lithium battery when energised. I have set all the required settings for HV, LV, SOC and time to trip and reset.
Now I then raised the BMV-702 LV trip setting to 14V while the battery was sitting at 13.2V. No trip was activated. Setting 11 Relay Mode DFLT and Setting 12 Invert relay ON.
Can I test the BMV-702 this way or must the voltage move down to a trip value over time?
JR