question

bschwartz87 avatar image
bschwartz87 asked

Rx port function missing for 150/35 in Victron Connect

Hi guys,

I have an issue with configuration of my smart solar 150/35:

I used to be able to configure the RX port in the Victron Connect App but it's no longer available.
I only see the settings of the tx port.

I'm using a non inverting remote on-off cable to control the MPPT but for my new ones, I can't configure the RX port.

any idea?


Thanks
Ben

MPPT ControllersVictronConnect
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Thiemo van Engelen (Victron Energy staff) avatar image
Thiemo van Engelen (Victron Energy staff) answered ·

Hi @bschwartz87

For these MPPTs, the remote on/off is the only possible (and thus default) behavior for the RX pin so the option to configure it is not shown in VictronConnect. The remote on/off cable should work out of the box.

Kind regards,

Thiemo van Engelen

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bschwartz87 avatar image
bschwartz87 answered ·

Hi Thiemo,

Thanks for your answer. Got it, indeed, it works fine out of the box.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.