I have a very specific battery system, nominal it is 48V, but at its lowest SoC it is 31V. Will the multiplus be able to start charging when the battery is at this point or will it go into error?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a very specific battery system, nominal it is 48V, but at its lowest SoC it is 31V. Will the multiplus be able to start charging when the battery is at this point or will it go into error?
The Multi will stop discharging at 37,2V (that is the lowest value you can set) but should be able to start charging with only 31V.
Additional resources still need to be added for this topic
38 People are following this question.
Multiplus II 48/3000 - inaccurate voltage reported, continuous charging / discharging at 100 %
Leaving MultiPlus voltage sense connected when battery disconnect switch is OFF.
CCGX Firmware 2.42 - change to source of voltage measurement?
Camper Van Schematic - please critique
Are my MultiPlus II VE Config charger settings correct for 4 x Omnipower 200Ah batteries?