Feature request, mppt 75/15 load output Vbat control. It is not possible to reverse the condition for load output on/off because the Vhigh values are always above Vlow. If it were possible to define Vlow higher than Vhigh, the load output could be used to activate an additional charger. In my caravan all loads are connected directly to the battery. Although I have an extra charger that can be permanently connected to the battery and switched on, it makes no sense to constantly keep the battery at 100%. With the above function, voltage-dependent recharging could be achieved if a relay for the charger is activated by the load output.
(Translated by Google)